Local atomic and electronic structure in the LiVPO4(F,O) tavorite-type materials from solid-state NMR combined with DFT calculations

⁷Li, ³¹P, and ¹⁹F solid-state nuclear magnetic resonance (NMR) spectroscopy was used to investigate the local arrangement of oxygen and fluorine in LiVPO₄F_1-yO_y materials, interesting as positive electrode materials for Li-ion batteries. From the evolution of the 1D spectra versus y, 2D ⁷Li radiofrequency-driven recoupling (RFDR) experiments combined, and a tentative signal assignment based on density functional theory (DFT) calculations, it appears that F and O are not randomly dispersed on the bridging X position between two X–VO₄–X octahedra (X = O or F) but tend to segregate at a local scale. Using DFT calculations, we analyzed the impact of the different local environments on the local electronic structure. Depending on the nature of the VO₄X₂ environments, vanadium ions are either in the +III or in the +IV oxidation state and can exhibit different distributions of their unpaired electron(s) on the d orbitals. Based on those different local electronic structures and on the computed Fermi contact shifts, we discuss the impact on the spin transfer mechanism on adjacent nuclei and propose tentative signal assignments. The O/F clustering tendency is discussed in relation with the formation of short V^IVO vanadyl bonds with a very specific electronic structure and possible cooperative effect along the chain.     

Ultrathin Mn Doped Ni-MOF Nanosheet Array for Highly Capacitive and Stable Asymmetric Supercapacitor

In this study, we demonstrate that an Mn-doped ultrathin Ni-MOF nanosheet array on nickel foam (Mn_0.1-Ni-MOF/NF) serves as a highly capacitive and stable supercapacitor positive electrode. The Mn_0.1-Ni-MOF/NF shows an areal capacity of 6.48 C cm⁻² (specific capacity C: 1178 C g⁻¹) at 2 mA cm⁻² in 6.0 m KOH, outperforming most reported MOF-based materials. More importantly, it possesses excellent cycle stability to maintain 80.6 % capacity after 5000 cycles. An asymmetric supercapacitor device utilizing Mn_0.1-Ni-MOF/NF as the positive electrode and activated carbon as the negative electrode attains a high energy density of 39.6 Wh kg⁻¹ at 143.8 Wkg⁻¹ power density with a capacitance retention of 83.6 % after 5000 cycles.     

基于有序介孔碳的氯离子选择性电极的制备及其在手持传感系统中的应用

以有序介孔碳(OMC)球为离子-电子转换层,制备了固态氯离子选择性电极,构建了基于离子敏感的场效应晶体管(ISFET)的手持式传感系统,用于检测人体血清中的氯离子。优化了OMC前驱体的碳化温度,探究了OMC形貌结构对电极传感性能的影响;电极柔性化制备后考察了其在手持系统中对氯离子的检测效果。结果表明,最优条件下,电极在5.12×10^-4~1.02 mol/L的浓度范围呈现线性响应,响应斜率为60 mV/decade。该柔性电极在手持传感系统中展现出高灵敏度和重现性,可用于人体血清样品中氯离子的检测,其回收率为96.3%~104.9%。     

Study of the initial stage of manganese dioxide electrodeposition on a rotating ring-disk electrode

The initial stage of electrodeposition of manganese dioxide has been studied on the platinum disk electrode and on the ring-disk electrode. Two current maxima were observed on the anodic voltammograms. It has been shown that the first rise in the current is associated with the formation of manganese dioxide (MD) nuclei on the electrode surface, and the second with their growth at the border between MnO₂ and bare platinum due to an increase in the perimeter of the nuclei. Electrodeposition on bare platinum proceeds at a higher rate than on the surface of growing MD. This is explained by the difference in the reaction mechanisms on these substrates. The first stage of the process on the growing MD is the chemisorption of Mn(II) ions with the formation of Mn(III) ions, which are then electrochemically oxidized to MD. Chemisorption is the slowest step in the whole process.     

Highly Sensitive AdSV Method for Fe(III) Determination in Presence of Solochrome Violet RS on Renewable Amalgam Film Electrode

The new DP AdSV method for high sensitive Fe(III) determination in the presence of Solochrome Violet RS was developed. The use of an innovative renewable amalgam film electrode Hg(Ag)FE allowed to obtain high sensitivity and significantly minimize the mercury consumption. The best results were obtained for surface area of Hg(Ag)FE equal to 11.8 mm². Instrumental parameters were optimized. The optimal results were obtained using differential pulse technique for the following values: sampling and waiting time ts=tw=10 ms, step potential Es=5 mV, pulse amplitude ΔE=50 mV. Measurements were conducted in 0.05 M acetate buffer (pH 5.6), the concentration of SVRS was equal to 5 μM. Deposition step was carried out at the potential ?400 mV for 20 s. Calculated detection limit for 40 s preconcentration time was equal to 1.4 nM (78 ng L^?1). The influence of the common in environment, organic and inorganic interferences was studied. The developed method for Fe(III) determination was successfully applied and validated by investigation of certified reference material SPS‐SW2 Batch 118 and recovery of Fe(III) from various spiked samples as snow, tap water and bottom sediments. The repeatability (for 50 nM of Fe(III)) of the developed method expressed as CV was equal 3.1 % (n=5).     

Electrochemical Characterization and Voltammetric Determination of Benzoyl Derivatives of Phenobarbital Using Glassy Carbon Electrode

The electrochemical behavior of a number of benzoyl barbiturates was studied using a glassy carbon electrode (GCE). The kinetics of the electrode process is determined, the contribution of physical adsorption to the electrochemical process is estimated, and the mechanism of the possible electrochemical reaction is proposed. It is shown that the electrochemical reduction potentials of benzoyl phenobarbital derivatives are determined by the LUMO energies, calculated by the B3LYP 6‐311+G method. It is established that the process is quasi‐reversible, complicated by adverse reactions. The influence of halogen type and its position in the benzoyl residue of the studied substances on the analytical signal is established. The effective values of the dissociation constants of various forms of benzoyl derivatives were calculated using the example of halonal, for which the values 3.16 ? 10^?8 and 6.31 ? 10^?12, respectively, were found.     

Voltammetric Study and Rapid Quantification of Resorcinol in Hair Dye and Biological Samples Using Ultrasensitive Maghemite/MWCNT Modified Carbon Paste Electrode

Increased concern over the risk resorcinol (RS) pose to ecology and humans, led to its position in European Union Category 1 list of endocrine disruptors. Legal measures restricted RS utilization and hence crucial to monitor its levels in the environment. Herein we report development of highly efficient and economically viable electrochemical sensor for quantitative determination of RS based on 77Maghemite/MultiWall Carbon Nanotube (M/MWCNT) modified carbon paste electrode. M/MWCNT was synthesized via strategic IR irradiation for the first time, a promising approach to overcome other complicated chemical routes. Powder X‐ray diffraction (PXRD), Transmission electron microscopy (TEM), Field emission scanning electron microscopy (FESEM) and Energy dispersive X‐ray (EDX) were used for characterization. Using Differential Pulse Voltammetry (DPV), we report the lowest detection limit at 0.02 μM. The potential application of the sensor was accomplished as a result of excellent recoveries made from real samples fortified with RS. Results indicated the proficiency of the sensor reliable for rapid, onsite monitoring of RS water contamination and in biological matrices.     

Hydrogel Microchambers Integrated with Organic Electrodes for Efficient Electrical Stimulation of Human iPSC‐Derived Cardiomyocytes

A hydrogel‐based microchamber with organic electrodes for efficient electrical stimulations of human induced pluripotent stem cell‐derived cardiomyocytes (hiPSC‐CMs) is described. The microchamber is made from molecularly permeable, optically transparent, and electrically conductive polyvinyl alcohol (PVA) hydrogel and highly capacitive carbon electrode modified with poly(3,4‐ethylenedioxythiophene) (PEDOT). Spheroids of hiPSC‐CMs are cultured in microchambers, and electrically stimulated by the electrode for maturation. The large interfacial capacitance of the electrodes enables several days of electrical stimulation without generation of cytotoxic bubbles even when the electrodes are placed near the spheroids. The spheroids can be cultivated in the closed microchambers because of the permeated nutrients through the hydrogel, thus the spheroids are stably addressable and the culture medium around the sealed microchambers can be simply exchanged. Synchronized beating of the spheroids can be optically analyzed in situ, which makes it possible to selectively collect electrically responsive cells for further use. As the hydrogel is electrically conductive, the amount of electrical charge needed for maturing the spheroids can be reduced by configuring electrodes on the top and the bottom of the microchamber. The bioreactor will be useful for efficient production of matured hiPSC‐CMs for regenerative medicine and drug screening.     

FLTD三电极场畸变气体开关寿命特性

针对设计的一种场畸变气体开关,研究中间电极材料分别为不锈钢和黄铜条件下的烧蚀特性,结合开关寿命期间静态与触发特性的变化规律,获得决定开关寿命的关键因素,为三电极场畸变气体开关的性能优化提供理论支撑。研究结果表明,采用不锈钢和黄铜作为中间电极的烧蚀区域以及表面粗糙度均随着放电次数增加而增大,黄铜电极烧蚀较为严重且表面有明显的烧蚀圆斑,不锈钢电极则具有更高的表面粗糙度,阴阳极表面烧蚀存在明显差异,随着放电次数的增加,击穿点向电极边缘区域集中,影响开关的沿面绝缘特性,是导致开关寿命终结的主要原因。     

Nickel sulphide-reduced graphene oxide composites as counter electrode for dye-sensitized solar cells: Influence of nickel chloride concentration

Nickel sulphide-reduced graphene oxide (NiS-rGO) composite films have been prepared via modified Hummers’s method assisted with spin coating technique. The NiS-rGO samples were then employed as counter electrode in a dye-sensitized solar cell (DSSC). The main aim of this work is to investigate the relationship between the concentrations of NiCl₂ with the properties of NiS-rGO and performance parameters of the device. The dominant rGO and minor NiS phase exist in the composite. The morphology of the composite is white strips rGO and NiS agglomerate particle. The element of C, O, Ni and S present in the composite. The highest η of 1.04% and J_sc of 7.39 mA cm⁻² were obtained from the device with 0.06 M NiCl₂ resulted from the longest carrier lifetime. The photovoltaic parameters results reveal that NiS-rGO composite has potential to become as a free platinum counter electrode of DSSC.